18 Braco Place, Christchurch 4.
Cell: 021 683871 Fax: 03 3587193
Email: alex@innovativesystems.co.nz
Made to Order:
| Low Drag & Contoured - $230 | Aluminium Rudder Stock - $200 |
| Centreboards – Square Tip - $460 | Aluminium Rudder Stock with Gudgeons - $230 |
| Centreboards - Contoured - $540 | Aluminium Gudgeons - pair & postage- $ 30 |
Courier and Packing add - $35
GST is included. 2011/12 prices and materials subject to change
without notice. Guarantee: 2 years,
send back the bits and I will replace them.
To find out how to get started contact secretary Nigel Price:
Email: nigelprice@clear.net.nz
Phone: 09 478 5676
Kitset Sunburst frames (side seat and false floor) computer cut and ready for shipment to anywhere in NZ for almost less cost than to buy the ply from your local retailer.
Prices below incl GST
| Sunburst frames kit all cut out/scribed as appropriate for either a false floor or side seat version – same kit – as shown on pages 59 to 62 in the building guide. | $448.62 + freight |
| For the 6 sheets of 6mm plywood for the hull and interior etc, we can get you a quote | Please contact us |
| The freight costs would be:South Island North Island |
$40.00 $50.00 |
The plywood is all marine bonded exterior and quite satisfactory for a Sunburst. As a comparison, if you were to go to a local supplier, probably the very best price you could get would be $485.00. So for $30.00 plus freight you can have all the frames cut out accurately and none of the hassles associated with copying from plans and then cutting by jigsaw.
The fibreglass boats supplier is:
Davie Norris Boatbuilders,
11 Newtown Street,
Bromley,
Christchurch,
New Zealand.
phone: 03 3848454
website: www.davienorris.co.nz
Here is a document that provides the restrictions for a Sunburst.
Here are a few tips to help you sail faster.
Boats and gear for sale and wanted to buy. If you want to place a listing email:web@sunburst.org.nz